제품명 : FSP200-50PL

200와트 ATX 파워서플라이 입니다.
1U 사이즈에 장착이 됩니다.
SATA 케이블은 없네요.

    도면 다운받기
 
      CSA 인증서 다운받기
      UL 인증서 다운받기





200와트 ATX 파워서플라이입니다. AC110/220V 선택해서 사용가능하며

1U높이의 사이즈로 Flex ATX 파워규격인 제품입니다.

Safety
Features
 
  • High efficiency
  • Low ripple & noise
  • Output over voltage protection
  • Short circuit protection on all outputs
  • Resettable power shut down
  • Internal 4 cm fan
  • 100% burn-in under high ambient temperature (50°C)
  • MTBF: 100K hours at 25°C
Specifications
 

Input Specifications
• Voltage:
115/230VAC
• Frequency: 115V / 60Hz;
230V / 50Hz.
• Input current: 5.0 amps maximum / 115 Vrms;
3.0 amps maximum / 230 Vrms.
 
Output Specifications
• Over-voltage protection: +5V : 6.82V (maximum);
+3.3V : 4.5V (maximum)
• Overload protection: +3.3V : 34A maximum;
+5V : 34A maximum;
+12V: 18A maximum.
• Remote ON/OFF control: The power supply shall accept a logic collector level which
will disable / enable all output voltage (excluding +5V standby).
• Power good signal: 115/230V (full load) : 100 - 500 ms
 
General Specifications
• Efficiency: 72% / 115V;
72% / 230V.
• Hold-up time: 17.0 ms minimum: at  115V / 60 Hz;
17.0 ms minimum: at  230V / 50 Hz.
 
Environmental Specifications
• Operating conditions:
200W / ambient temperature 0°C~+35°C
150W / ambient temperature 0°C~+50°C
• Storage and
  shipping conditions: 		ambient temperature -20°C~+80°C
• Dielectric withstand: input / output 1800 VAC for 1 second,
input to frame ground 1800VAC for 1 second

Output
 
Output Voltage
Min. load
Max. load
Load Reg.
Ripple & Noise
+5Vsb 0.0A 2.0A ±5% 100mV P-P
-12V 0.0A 0.3A ±10% 120mV P-P
+12V 0.2A 12.0A ±5% 120mV P-P
+5V 1.0A 15.0A ±5% 50mV P-P
+3.3V 0.2A 16.0A ±5% 50mV P-P
+3.3V & +5V total output not exeed 75W / *-5V optional (0.1A Max.)





 
서울특별시 구로구 구로동 187-10번지 코오롱싸이언스밸리 1차 706,707호 전화:(02)2025-4860~4 팩스:(02)2025-4865